沖壓機械手看著很簡單，就是銅銅鐵鐵打造的，然而，一臺沖壓機械手的研發定制是經過千千萬萬次測試的，新常態下越來越多的傳統制造業企業都將由機器人逐漸替代，而且這還會慢慢的普及下去，漸漸融入人們的日常生活。自動化生產深深的融入各個領域，生活將會更加便捷，尤其是沖壓機器人、沖壓機械手、注塑機機器人更是成為了工廠的一部分。

Stamping manipulator looks very simple, is copper and copper iron built, however, a stamping manipulator R & amp; d customization is after thousands of tests, the new normal under more and more traditional manufacturing enterprises will be gradually replaced by robots, and this will slowly popularize, gradually integrated into peoples daily life. Automated production is deeply integrated into all fields, life will be more convenient, especially stamping robots, stamping manipulators, injection molding machine robots have become part of the factory.沖床

隨著中國制造2025的提出和互聯網 的普及，很多地區的工廠都進行了機器換人，但是在操作沖壓機械手的時候還是有很多要注意的地方，今天我們就來和大家說說沖壓機械手操作注意事項。

With the proposal of "Made in China 2025" and the Popularization of "internet", factories in many areas have carried out "machine replacement", but in the operation of stamping manipulator There is still a lot to pay attention to, today we come to talk to you about stamping manipulator operation precautions.沖床

在操作上下料機器人之前一定要注意檢查電器控制箱內是否有水、油進入，若電器受潮，切勿開機，并且要檢查供電電壓是否符合，前后安全門開關是否正常。驗證電動機的轉方向是否一致，然后打開電源。在沖壓機械手需要拆除的時候，其中對關掉射出機電源；關掉機械手電源；關掉機械手氣壓源。

Before operating the loading and unloading robot must pay attention to check the electrical control box whether there is water, oil into, if the electrical appliances damp, do not turn on, and to check whether the supply voltage is in line with, before and after the safety door switch is normal. Verify that the turn direction of the motor is consistent, and then turn on the power supply. When the stamping manipulator needs to be removed, it turns off the ejection electromechanical source, turns off the manipulator power supply, and turns off the manipulator air pressure source.沖床

洩除空壓，放松引拔氣缸固定板固定螺絲，并移動手臂，移動緩沖器座，使其靠近手臂。旋緊引拔氣缸固定板，讓手臂不能移動，將旋轉安全螺絲鎖好，使機械手不能旋轉等，這些細節方面的問題都應該注意。

Remove the air pressure, relax the pull-out cylinder fixing plate fixing screws, and move the arm to move the buffer seat so that it is close to the arm. Tighten the drawing cylinder fixing plate, so that the arm can not move, will rotate the safety screws lock, so that the manipulator can not rotate, and so on, these details of the problem should be noted.沖床

深圳市創盈時代科技有限公司是一家專注于沖床機械手,上下料機械手,五金沖壓機械手，工業機器人，非標自動化設備的研發生產和銷售于一體的國家高新技術廠家。

本文關鍵詞：沖壓機械手操作注意事項